Lincoln Electric V350-PRO User Manual download pdf (Page 26)

ACCESSORIES

C-10 C-10

V350-PRO

Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC

Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC

OPTIONS / ACCESSORIES

Construction Version – K1728-2

• All welding modes for this model run with local out-

put control and weld terminals ON (e.g. Stick, TIG,

LN25 off the arc).

K930-1 TIG Module

K428,K446, K449 LN-25(Off the Arc)

Factory Version – K1728-1

• The factory model is the construction model with

the addition of the Wire Feeder/Remote Adapter.

• In this form, the V350-Pro provides the hardware to

power and connect to 24, 42 or 115 VAC wire feeders.

K857 Remote Output Control

K814 Arc Start Switch

K812 Hand Operated Amptrol

K870 Foot Operated Amptrol

K930-1 TIG Module

K428, K446, K449 LN-25

K617 (-1 or -2) K618 (-1 or -2) LN-742

K440 (-1), K567-1 LN-7 GMA

K1559-1, K1564-1 LN-10

K1499-1, K1521-1 DH-10

"CE" Version – K1728-3

• The "CE" version is the Factory version with the

addition of power line filtering allowing the machine

to comply with the European and Australian EMC

emission requirements.

Field Installed Options/Accessories

Two versions of the V350-Pro are available from the

factory for both the CE and ROW versions.

Options for K1728-1 Factory and K1728-3 "CE"

V350’s

• TIG Gas Control Kit – K1762-1

• Advance Process Panel – K1763-1

Options for all models of V350-PRO

• Undercarriage – K1764-1

Cobramatic Connection Instructions

A Cobramatic can only be used with a Factory or

"CE" version of the V350

1. Turn the Invertec power switch "off"

2. Connect the control cable from the Cobramatic to

the 24/42 VAC 14-pin wire feeder amphenol on

the rear of the Invertec.

3. Connect the electrode cable to the output terminal

of the polarity required by electrode. Connect the

work lead to the other terminal.

4. Set the meter polarity switch on the front of the

Invertec to coincide with wire feeder polarity used.

5. If a remote control such as K857 is to be used

with the Cobramatic, the remote can be connected

directly to the 6pin amphenol on the front of the

Invertec or use a K864 adapter to connect the

cobramatic and the remote to the 24/42VAC 14-

pin wire feeder amphenol connector on the rear of

the Invertec.

TIG Module K930-2

The TIG Module connects to the V350-Pro Factory or

CE versions with a K936-1 (9-14 pin) control cable.

Connect the K936-1 to the 115VAC Wire Feeder

Amphenol on the rear of the V350-Pro.

The TIG Module can also be used with the V350

Construction version. A K936-4 control cable is

required to supply 115VAC to the TIG Module from an

external 115VAC supply.

General Instructions for Connection of Wire

Feeders to V350-Pro

Wire feeders other than LN-7 and LN-25 may be used

provided that the auxiliary power supply capacity of

the V350-Pro is not exceeded. K867 universal

adapter plug is required. See connection diagram

S19406 and S19386 at the back of this manual for

more information.

Remote Control of Invertec

Remote Control K857, Hand Amptrol K963 and Foot

Amptrol K870.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 154 155

Comments to this Manuals

No comments

Lincoln Electric V350-PRO User Manual Page 26

Comments to this Manuals

Related products and manuals for Welding System Lincoln Electric V350-PRO