Lincoln Electric Pro-MIG 140 User Manual download pdf (Page 8)

A-2

INSTALLATION

Pro-MIG 140

A-2

Read entire installation section before starting

installation.

SAFETY PRECAUTIONS

IDENTIFY AND LOCATE

COMPONENTS

If you have not already done so, unpack the Pro-MIG

140 from its carton and remove all packing material

around the Pro-MIG 140. Remove the following loose

items from the carton (see Figure A.1):

1. Pro-MIG 140

2. Gun and cable assembly

(1)

3. Literature and miscellaneous including:

a) This operating manual

b) 3 extra .023"-.025” (0.6 mm) contact tips

c) 2 extra .035” (0.9 mm) contact tips

d) Hex key wrench for removal of drive roll.

4. 10 ft (3.0 m) work cable.

5. Work clamp.

6. a) 2lb. spool of .025” (0.6 mm) Super Arc L-56

MIG wire.

b) Sample spool of Innershield .035” (0.9 mm)

NR-211-MP.

7. Welding Helmet.

8. Adjustable mixed-Gas Regulator & Hose.

9. Instructional video.

10. Nozzle.

For available options and accessories refer to the

Accessories Section of this manual.

As shipped from the factory, the Pro-MIG 140 gun

liner is ready to feed .023” (0.6 mm) -.035 (0.9 mm)

wire.

ELECTRIC SHOCK can kill.

• Only qualified personnel should perform

this installation.

• Only personnel that have read and under-

stood the Pro-MIG 140 Operating Manual

should install and operate this equipment.

• Machine must be plugged into a receptacle

which is grounded per any national, local

or other applicable electrical codes.

• The Pro-MIG 140 power switch is to be in

the OFF (“O”) position when installing

work cable and gun and when connecting

power cord to input power.

WARNING

FIGURE A.1

-M

Pro-MIG

™ 1

140

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 65 66

Comments to this Manuals

No comments

Lincoln Electric Pro-MIG 140 User Manual Page 8

Comments to this Manuals

Related products and manuals for Welding System Lincoln Electric Pro-MIG 140