Lincoln-electric COMMANDER 500 IM644-A User Manual

Commander 500OPERATOR’S MANUALIM644-AJanuary, 2001Safety Depends on YouLincoln arc welding and cuttingequipment is designed and builtwith safety

A-2INSTALLATION COMMANDER 500A-2Read this entire installation section before youstart installation.SAFETY PRECAUTIONSDo not attempt to use this equi

A-3INSTALLATION COMMANDER 500A-3LIFTINGThe Commander lift bale should be used to lift themachine. The Commander is shipped with the lift baleretract

FOR ENGINEpowered equipment.1.a. Turn the engine off before troubleshooting and maintenancework unless the maintenance work requires it to be running.

iiSAFETYiiARC RAYS can burn.4.a. Use a shield with the proper filter and coverplates to protect your eyes from sparks andthe rays of the arc when weld

FOR ELECTRICALLYpowered equipment.8.a. Turn off input power using the disconnectswitch at the fuse box before working onthe equipment.8.b. Install equ

ivSAFETYivPRÉCAUTIONS DE SÛRETÉPour votre propre protection lire et observer toutes les instructionset les précautions de sûreté specifiques qui parra

Thank Youfor selecting a QUALITY product by Lincoln Electric. We want youto take pride in operating this Lincoln Electric Company product •••as much p

TABLE OF CONTENTSPageSafety ...i

TABLE OF CONTENTSAccessories.......Section COptional Fie

A-1INSTALLATION COMMANDER 500A-1TECHNICAL SPECIFICATIONS - Commander 500 (K1639-1 & -2)Make/Model Description Speed (RPM) Displacement Starting