Lincoln Electric V350-PRO User Manual download pdf (Page 14)

B-1

OPERATION

V350-PRO (CE)

B-1

SAFETY PRECAUTIONS

ELECTRIC SHOCK can kill.

• Do not touch electrically live parts or

electrode with skin or wet clothing.

• Insulate yourself from work and

ground.

• Always wear dry insulating gloves.

------------------------------------------------------------------------

FUMES AND GASES can be danger-

ous.

• Keep your head out of fumes.

• Use ventilation or exhaust to remove

fumes from breathing zone.

------------------------------------------------------------------------

WELDING SPARKS can cause fire or

explosion.

• Keep flammable material away.

• Do not weld on closed containers.

------------------------------------------------------------------------

ARC RAYS can burn eyes and skin.

• Wear eye, ear and body

protection.

------------------------------------------------------------

See additional warning information at

front of this operator’s manual.

-----------------------------------------------------------

WARNING

GENERAL DESCRIPTION

PRODUCT DESCRIPTION & DUTY CYCLE

The Invertec V350-PRO (CE) offers multi mode CV

and CC DC welding and is rated at 350 amps, 34 volts

at a 60% duty cycle with 3 phase input. It is also rated

at 320 amps with single phase input. It is rated at 275

amps, 100% duty cycle.

OPERATIONAL FEATURES and CONTROLS:

UPPER CONTROL PANEL

1. AMPS Meter

• Prior to STICK or TIG operation (current flow), the

meter displays preset current value (either 2 amps

or +/- 3% (e.g. 3 amps on 100), whichever is

greater).

• Prior to CV operation, the meter displays four dash-

es indicating non-presettable AMPS.

• During welding, this meter displays actual average

amps.

• After welding, the meter holds the actual current

value for 5 seconds. Output adjustment while in the

"hold" period results in the "prior to operation" char-

acteristics stated above. The displays blink indicat-

ing that the machine is in the "Hold" period.

2. VOLT METER

• Prior to CV operation (current flow), the meter dis-

plays desired preset voltage value (+/- .5V).

• Prior to STICK or TIG operation, the meter displays

the Open Circuit Voltage of the Power Source or

four dashes if the output has not been turned on.

• During welding, this meter displays actual average

volts.

• After welding, the meter holds the actual voltage

value for 5 seconds. The displays blink indicating

that the machine is in the "Hold" period.

• Output adjustment while in the "hold" period results

in the "prior to operation" characteristics stated

above.

3. OUTPUT CONTROL

• Output control is conducted via a single turn poten-

tiometer.

• Adjustment is indicated by the meters as stated

above.

• When in TIG modes, this control sets the maximum

welding current. Full depression of a foot or hand

Amptrol results in the preset level of current.

4. WELD TERMINALS-REMOTE , ON

• Two status lights indicate the location of trigger con-

trol as determined by the "WELD TERMINALS"

push button.

• If trigger control is local "weld terminals on", the ON

display will be lit.

• If trigger control is remote "weld terminals remotely

controlled", the REMOTE display will be lit.

• The unit will power up in "pre-determined preferred"

trigger modes.

STICK = ON

TIG and CV = ON or REMOTE depending if remote

output controls are connected to the machine.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 37 38

Comments to this Manuals

No comments

Lincoln Electric V350-PRO User Manual Page 14

Comments to this Manuals

Related products and manuals for Welding System Lincoln Electric V350-PRO