Lincoln Electric Pro 100 User Manual download pdf (Page 9)

A-2

INSTALLATION

PRO 100

A-2

Read entire installation section before starting

installation.

SAFETY PRECAUTIONS

IDENTIFY AND LOCATE

COMPONENTS

If you have not already done so, unpack the PRO 100

from its carton and remove all packing material

around the PRO 100. Remove the following loose

items from the carton (see Figure A.1):

1. PRO 100

2. Gun and cable assembly

(1)

3. Literature and miscellaneous including:

a) This operating manual

b) Extra .035" contact tip

c) Hex key wrench for removal of drive roll.

4. 10 ft (3,0 m) work cable.

5. Work clamp.

6. Sample spool of Innershield .035" (0,9 mm)

NR-211-MP electrode.

7. Handshield with filter plate and lens.

8. Instructional video.

For available options and accessories refer to the

Accessories Section of this manual.

(1)

The gun is ready to feed 0.035" (0,9 mm) Inner-

shield wire.

ELECTRIC SHOCK can kill.

• Only qualified personnel should perform

this installation.

• Only personnel that have read and under-

stood the PRO 100 Operating Manual

should install and operate this equipment.

• Machine must be plugged into a receptacle

which is grounded per any national, local

or other applicable electrical codes.

• The PRO 100 power switch is to be in the

OFF (“O”) position when installing work

cable and gun and when connecting power

cord to input power.

WARNING

FIGURE A.1

WELD-P

AK 10

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 46 47

Comments to this Manuals

No comments

Lincoln Electric Pro 100 User Manual Page 9

Comments to this Manuals

Related products and manuals for Welding System Lincoln Electric Pro 100