Lincoln-electric POWER ARC 5000 User Manual download pdf (Page 19)

B-3

OPERATION

B-3

GENERATOR/WELDER CONTROLS

See Figure B.1 for the location of the following fea-

tures:

1. CURRENT CONTROL DIAL: Adjusts continuous

current output. The amperages on the dial corre-

spond to the average amperages needed for spe-

cific Lincoln welding electrodes.

2. ELECTRODE SELECTION GUIDE: Provides rec-

ommended electrodes.

3. WELD OUTPUT TERMINALS (TO ELECTRODE

HOLDER, HIGH RANGE AND LOW RANGE): Pro-

vides the connection point for the electrode hold-

er cable.

4. WELD OUTPUT TERMINAL (TO WORK):

Provides the connection point for the work cable.

5. GROUNDING TERMINAL: Provides a connection

point for connecting the machine to earth ground

for the recommended grounding procedure.

6. CIRCUIT BREAKERS (3): Provides separate

overload current protection for the 120 volt and

120/240 volt receptacles.

7. 15 AMP, 120 VOLT GFCI DUPLEX RECEPTACLE:

For supplying 120 volt power to operate one or

two electrical devices.

8. 30 AMP, 120 VOLT TWIST-LOCK RECEPTACLE:

120 volt power for higher power requirements.

30 AMP, 120/240 VOLT TWIST-LOCK RECEPTACLE:

For supplying 240 volt power and for connection

to 120/240 volt premises wiring.

10. ENGINE HOUR METER: Records engine running

time. Use this meter to schedule engine mainte-

nance.

POWER ARC 5000

120 VOLTS 15 AMPS

120 VOLTS 30 AMPS

120/240 VOLTS 30 AMPS

CIRCUIT BREAKERS

WORK LOW RANGE HIGH RANGE

WARNING

WELDING ELECTRODES

FIGURE B.1 – OUTPUT PANEL CONTROLS

1. CURRENT CONTROL DIAL

2. ELECTRODE SELECTION GUIDE

3. WELD OUTPUT TERMINALS (TO ELECTRODE HOLDER, HIGH RANGE AND LOW RANGE)

4. WELD OUTPUT TERMINAL (TO WORK)

5. GROUNDING TERMINAL

6. CIC. GFCI DUPLEX RECEPTACLE - 120 VOLT, 15 AMP

7. GFCI DUPLEX RECEPTACLE - 120 VOLT, 15 AMP

8. TWIST-LOCK RECEPTACLE - 120 VOLT, 30 AMP

9. TWIST-LOCK RECEPTACLE - 120/240 VOLT, 30 AMP

10.ENGINE HOUR METER

CONTROLS AND SETTINGS

All generator/welder controls are located on the Output Control Panel. Gasoline engine controls are mounted on

the engine. See Figures B.1 and B.2 and the explanations that follow.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 49 50

Comments to this Manuals

No comments

Lincoln-electric POWER ARC 5000 User Manual Page 19

Comments to this Manuals

Related products and manuals for Tools Lincoln-electric POWER ARC 5000