Lincoln-electric LN-10 User Manual download pdf (Page 28)

C-2

ACCESSORIES

C-2

K683-3 DUAL PROCEDURE SWITCH

Kit includes gun switch, and mountings for Lincoln

Innershield and Magnum guns, with 15 ft. (4.5m) con-

trol cable and 5-pin plug with two leads to connect to

gun trigger.

SPINDLE ADAPTERS:

Coil Adapter:

K1504-1

Permits 50 lb to 60 lb (22.7-27.2 Kg.) Coils

to be mounted on 2” (51 mm) O.D. spindles.

K435 Permits 14 lb. (6 kg) Innershield coils to be

mounted on 2" (51 mm) O.D. spindles.

K468 Permits 8" (203 mm) O.D. spools to be mount-

ed on 2" (51 mm) O.D. spindles.

Readi-Reel Adapters:

K363P

Adapts Lincoln Readi-Reel coils of electrode

30 lb. (14 kg) and 22 lb. (10 kg) to a 2" (51 mm) spin-

dle. Durable molded plastic one piece construction.

Designed for easy loading; adapter remains on spin-

dle for quick changeover.

K438 Adapts Lincoln Readi-Reel coils of electrode

50-60 lb. (22.7-27.2 kg) to a 2" (51 mm) spindle.

GUN ADAPTERS (FOR 10 SERIES

WIRE DRIVE)

The LN-10 wire feeder is equipped with a factory

installed K1500-2 gun connection kit. This kit is for

guns having a Tweco #2-#4 type connector. The LN-

10 has been designed to make connecting a variety of

guns easy and inexpensive with the K1500 series of

gun connection kits. Gun trigger and dual procedure

lead connections connect to the single 5 pin recepta-

cle on the front of the feed head box.

Magnum 200/300/400 Guns

The easiest and least expensive way to use Magnum

200/300/400 guns with the LN-10 wire feeder is to

order them with the K466-2 connector kit, or to buy a

completely assembled Magnum gun having the K466-

2 connector (such as the K497-21,-22,-23 dedicated

Magnum 400 guns and the K497-20,-21 dedicated

Magnum 200 guns).

INPUT CABLE ASSEMBLIES:

K1797-25

Consists of a 14-conductor control cable extension 25ʼ

in length.

K1797-50

Consists of a 14-conductor control cable extension 50ʼ

in length.

Note:

Extensions can only be connected up to 100ʼ Maximum

length.

K1520-2 115V/42V TRANSFORMER KIT

Required to use LN-10 with Lincoln Power Sources

without 42VAC auxiliary and a 14-pin connector recep-

tacle. These power sources include the DC-250, DC-

600 (Below Code 10500), DC-1000 and Pulse Power

500. Also can be used with older DC-400 models.

K590-4 WATER CONNECTION KIT

Includes water cooled gun tube fittings and self-sealing

outlet and inlet quick-connectors for mounting into the

DH wire drive connection box.

K659-1 GAS GUARD REGULATOR

Adjustable flow regulator with removable adjustor key

for CO2 and Argon blend gases. Mounts onto wire drive

gas inlet, and reduces gas waste and arc start "blow" by

reducing surge caused by excess pressure in supply

hose.

K1449-1 DUAL PROCEDURE

REMOTE CONTROL

Includes a remote control box with a 16 ft. (5 m) length

control cable with 4-pin plug for the mating receptacle

on the bottom of the LN-10 control box. The remote con-

trol box contains a procedure selector switch and 2

rotating knob encoders, one controls arc voltage and the

other controls wire feed speed, which function the same

as comparable controls on the LN-10 front panel, when

the remote is connected and selected by the LN-10

Procedure Key.

K1450-”L” - Extension cables are available in lengths

“L” of 12, 16 or 25 ft. (3.6, 4.9 or 7.6) to match the con-

trol to Feeder cable length used.

K683-1 DUAL PROCEDURE SWITCH

Requires K686-2 Adapter for LN-10. Kit includes gun

switch, and mountings for Lincoln Innershield and

Magnum guns, with 15 ft. (4.5 m) control cable and 3-

pin plug. K686-2 Adapter permits 3-pin plug and 5-pin

gun trigger plug to be connected to LN-10 5-pin

Trigger/Dual Procedure receptacle.

LN-10

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 47 48

Comments to this Manuals

No comments

Lincoln-electric LN-10 User Manual Page 28

Comments to this Manuals

Related products and manuals for Tools Lincoln-electric LN-10