Lincoln Electric V350-PRO User Manual download pdf (Page 18)

B-5

OPERATION

B-5

AUXILIARY POWER

• 115VAC, 42VAC and 24VAC power is available

from the two 14-pin amphenols on the rear of the

unit. (K1728-2 Construction model of the Invertec

V350-PRO (CE) does not have the amphenols)

These supplies are intended to supply power for

auxiliary equipment like wire feeders and the TIG

Module.

• 115VAC supply is rated at 2 amps and is protected

by a 2.5 amp breaker located by the amphenol.

• 42 VAC supply is rated at 5.5 amps and is protected

by a 6 amp breaker located by the amphenol.

• 24 VAC supply is rated at 5.5 amps and is protected

by a 6 amp breaker located by the amphenol.

LIMITATIONS

• The V350-PRO (CE) is not recommended for

processes other than those listed.

• The V350-PRO (CE) can only be used with the rec-

ommended equipment and options.

RECOMMENDED PROCESSES

Properly equipped, the Invertec V350-PRO (CE)

supports GMAW, FCAW, SMAW, GTAW and CAC-

A processes for a variety of materials, including

mild steel, stainless steel, cored wires, and alu-

minum

V350-PRO (CE)

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 37 38

No comments

Lincoln Electric V350-PRO User Manual Page 18