Square Wave TIG 175OPERATOR’S MANUALSales and Service through Subsidiaries and Distributors Worldwide22801 St. Clair Ave. Cleveland, Ohio 44117-1199
3INSTALLATIONSQUARE WAVE TIG 1753a) A metal underground water pipe in direct contactwith the earth for ten feet or more.b) A 3/4” (19mm) galvanized pi
4INSTALLATIONSQUARE WAVE TIG 1754Electrode/Gas Output Receptacle on the front of thewelder and turn it clockwise until it is tight. This is aquick con
5INSTALLATIONSQUARE WAVE TIG 1755REMOTE CONTROL CONNECTIONA remote control receptacle is provided on the casefront of the welder for connecting a remo
6OPERATION6GENERAL DESCRIPTIONThe Square Wave TIG 175 is a constant current, singlerange AC/DC TIG (GTAW) arc welding power sourcewith built-in arc st
7OPERATION71. POWER SWITCH & LIGHT - Turns power on oroff to the welder. When switched “ON”, thecooling fan runs and the light wil
8OPERATION86.REMOTE CONTROL CONNECTOR - This connectorprovides connection for a remote control. See RemoteControl Operationin this section of the man
9OPERATION9to weld through the complete range of 12 to 175 amperes inAC TIG or DC- TIG requiring only one electrode, a 3/32” 2%thoriated tungsten.WELD
10ACCESSORIES10OPTIONAL ACCESSORIESK964-1 Undercarriage with Pivoting Single GasCylinder Platform - This undercarriage features a piv-oting platform t
11MAINTENANCE11SQUARE WAVE TIG 175ELECTRIC SHOCK can kill.• Only qualified personnel shouldperform this maintenance.• Turn the input power OFF at thed
12TROUBLESHOOTING12SQUARE WAVE TIG 175If for any reason you do not understand the test procedures or are unable to perform the tests/repairs safely, c
FOR ENGINEpowered equipment.1.a. Turn the engine off before troubleshooting and maintenancework unless the maintenance work requires it to be running.
13TROUBLESHOOTING13SQUARE WAVE TIG 175Observe all Safety Guidelines detailed throughout this manualIf for any reason you do not understand the test pr
14TROUBLESHOOTING14SQUARE WAVE TIG 175Observe all Safety Guidelines detailed throughout this manualIf for any reason you do not understand the test pr
15TROUBLESHOOTING15SQUARE WAVE TIG 175Observe all Safety Guidelines detailed throughout this manualIf for any reason you do not understand the test pr
16TROUBLESHOOTING16SQUARE WAVE TIG 175Observe all Safety Guidelines detailed throughout this manualIf for any reason you do not understand the test pr
17TROUBLESHOOTING17SQUARE WAVE TIG 175Observe all Safety Guidelines detailed throughout this manualIf for any reason you do not understand the test pr
18TROUBLESHOOTING18SQUARE WAVE TIG 175Observe all Safety Guidelines detailed throughout this manualIf for any reason you do not understand the test pr
19WIRING DIAGRAM19SQUARE WAVE TIG 175
20NOTES20SQUARE WAVE TIG 175
NOTESSQUARE WAVE TIG 175
Now Available...12th EditionThe Procedure Handbook of Arc WeldingWith over 500,000 copies of previous editions publishedsince 1933, the Procedure Hand
iiSAFETYiiARC RAYS can burn.4.a. Use a shield with the proper filter and coverplates to protect your eyes from sparks andthe rays of the arc when weld
WARNINGAVISO DEPRECAUCIONATTENTIONWARNUNGATENÇÃOSpanishFrenchGermanPortugueseJapaneseChineseKoreanArabicREAD AND UNDERSTAND THE MANUFACTURER’S INSTRUC
WARNINGAVISO DEPRECAUCIONATTENTIONWARNUNGATENÇÃOSpanishFrenchGermanPortugueseJapaneseChineseKoreanArabicLEIA E COMPREENDA AS INSTRUÇÕES DO FABRICANTE
FOR ELECTRICALLYpowered equipment.8.a. Turn off input power using the disconnectswitch at the fuse box before working onthe equipment.8.b. Install equ
ivSAFETYivPRÉCAUTIONS DE SÛRETÉPourvotre propre protection lire et observer toutes les instructionset les précautions de sûreté specifiques qui parrai
Thank Youfor selecting a QUALITY product by Lincoln Electric. We want youto take pride in operating this Lincoln Electric Company product •••as much p
TABLE OF CONTENTSPageSAFETY ...
1INSTALLATIONSQUARE WAVE TIG 1751TECHNICAL SPECIFICATIONS - Square Wave TIG 175 (K1582-1 only)For AC/DC Stick and DC TIG Welding at150A/25% Duty Cycle
2INSTALLATIONSQUARE WAVE TIG 1752ELECTRIC SHOCK can kill.• Only qualified personnel should perform this installation.• Turn the input power OFF at the
Comments to this Manuals