Lincoln-electric IM434 K497-,K2950- MAGNUM & MAGNUM PRO CURVE20 User Manual

MAGNUM & MAGNUM PRO CURVE200 GMA GUN and CABLE ASSEMBLYOPERATORʼS MANUALIM434-CSeptember, 2011Safety Depends on YouLincoln arc welding and

A-3INSTALLATION MAGNUM® & MAGNUM® PRO CURVE 200 GUNSA-3CONTACT TIP AND GAS NOZZLE INSTAL-LATIONa. Choose the correct size contact tip for the el

A-4INSTALLATION MAGNUM® & MAGNUM® PRO CURVE 200 GUNSA-4Connection to L-Tec Adapted FeedersGun cable assemblies which were assembled with aK466-5

MAGNUM® & MAGNUM® PRO CURVE 200 GUNSB-1OPERATIONB-1Read and understand this entire section beforeoperating your machine.SAFETY PRECAUTIONSELECTRIC

B-2OPERATIONB-2ELECTRODES AND EQUIPMENTThe MAGNUM® & MAGNUM® PRO CURVE 200 gunand cable has been designed for use with Lincoln L-50 and Super Arc

D-1MAINTENANCED-1MAGNUM® & MAGNUM® PRO CURVE 200 GUNSExcessive pressure at the start may cause the dirtto form a plug.Flex the cable over its enti

D-2MAINTENANCED-2NOTE: The cable contains three control leads. Anytwo control leads can be used, provided the two colorused are the same at both ends.

f. Check that the cable boot and cable handle are onthe cable. Slip the connector nut over the copperstrands with the threaded end out. Assembleincomi

E-1TROUBLESHOOTINGE-1MAGNUM® & MAGNUM® PRO CURVE 200 GUNSIf for any reason you do not understand the test procedures or are unable to perform the

E-2TROUBLESHOOTINGE-2MAGNUM® & MAGNUM® PRO CURVE 200 GUNSObserve all Safety Guidelines detailed throughout this manualIf for any reason you do not

READ AND UNDERSTAND THE MANUFACTURER’S INSTRUCTION FOR THIS EQUIPMENT AND THE CONSUMABLES TO BEUSED AND FOLLOW YOUR EMPLOYER’S SAFETY PRACTICES.SE REC

FOR ENGINEpowered equipment.1.a. Turn the engine off before troubleshooting and maintenancework unless the maintenance work requires it to be running.

LEIA E COMPREENDA AS INSTRUÇÕES DO FABRICANTE PARA ESTE EQUIPAMENTO E AS PARTES DE USO, E SIGA ASPRÁTICAS DE SEGURANÇA DO EMPREGADOR.WARNINGAVISO DEPR

• Sales and Service through Subsidiaries and Distributors Worldwide •Cleveland, Ohio 44117-1199 U.S.A. TEL: 216.481.8100 FAX: 216.486.1751 WEB 

iiSAFETYiiARC RAYS can burn.4.a. Use a shield with the proper filter and coverplates to protect your eyes from sparks andthe rays of the arc when weld

iiiSAFETYiiiFOR ELECTRICALLYpowered equipment.8.a. Turn off input power using the disconnectswitch at the fuse box before working onthe equipment.8.b.

ivSAFETYivPRÉCAUTIONS DE SÛRETÉPour votre propre protection lire et observer toutes les instructionset les précautions de sûreté specifiques qui parra

vvThank Youfor selecting a QUALITY product by Lincoln Electric. We want youto take pride in operating this Lincoln Electric Company product••• as much

PageInstallation ...Section ASafety Precautions ..

A-1INSTALLATION MAGNUM® & MAGNUM® PRO CURVE 200 GUNSA-1CONNECTOR KIT INSTALLATIONTO GUN CABLEThe MAGNUM® & MAGNUM® PRO CURVE 200cable is shi

A-2INSTALLATION MAGNUM® & MAGNUM® PRO CURVE 200 GUNSA-2c. For L-Tec machines that require lead connectionsto made at a terminal strip located wi