Lincoln-electric IM10045 Innershield Pro Gun K126-10,11,12 User Manual

K126-[ ]Innershield Pro GunOPERATORʼS MANUALIM10045-BAugust, 2012Safety Depends on YouLincoln arc welding and cuttingequipment is designed and bui

A-3INSTALLATION K126-[ ] INNERSHIELD® PROA-3The K126 Innershield Pro has stainless steel jacketedgoosenecks for extended life. The goosenecks aresi

A-4INSTALLATIONA-4Read this entire installation section before youstart installation.SAFETY PRECAUTIONSELECTRIC SHOCK can kill.• Do not touch electric

A-5INSTALLATION K126-[ ] INNERSHIELD® PROA-5K466-4 Installation (For Hobart feeders; i.e. 27...)1. Remove brass cable connector (see Figure A.2)from

A-6INSTALLATION K126-[ ] INNERSHIELD® PROA-62. Attach the round connector of the gun controlcable provided to the trigger connector on thefront of t

A-7INSTALLATION K126-[ ] INNERSHIELD® PROA-72. Fully push the brass connector end of the guncable into the brass adapter on the outgoingside of the

B-1OPERATIONB-1K126-[ ] INNERSHIELD® PROELECTRODES AND EQUIPMENTThe K126 Innershield Pro gun has been designed foruse with Lincoln Innershield brand s

C-1ACCESSORIESC-1WIRE FEEDER CONNECTION KITSK126-[ ] INNERSHIELD® PROWire Feeder Data Kit No. for GunManufacturerLincoln ElectricTweco AdaptedMille

C-2ACCESSORIESC-2K126-[ ] INNERSHIELD® PROGUN CONSUMABLE PARTSLINER ASSEMBLY*K613-X Gun Connector Kit is Required for 3/32” wire.Wire Diameter0.0350.0

D-1MAINTENANCED-1K126-[ ] INNERSHIELD® PRONOTE: The maximum wire size for a K466-3 and K466-4is 5/64”. Therefore the 3/32” and 1/8” liners are notinc

E-1TROUBLESHOOTINGE-1K126-[ ] INNERSHIELD® PROIf for any reason you do not understand the test procedures or are unable to perform the tests/repairs s

FOR ENGINEpowered equipment.1.a. Turn the engine off before troubleshooting and maintenancework unless the maintenance work requires it to be running.

E-2TROUBLESHOOTINGE-2K126-[ ] INNERSHIELD® PROObserve all Safety Guidelines detailed throughout this manualIf for any reason you do not understand the

E-3TROUBLESHOOTINGE-3K126-[ ] INNERSHIELD® PROObserve all Safety Guidelines detailed throughout this manualIf for any reason you do not understand the

NOTES

NOTES

NOTES

WARNINGAVISO DEPRECAUCIONATTENTIONWARNUNGATENÇÃOSpanishFrenchGermanPortugueseJapaneseChineseKoreanArabicREAD AND UNDERSTAND THE MANUFACTURER’S INSTRUC

WARNINGAVISO DEPRECAUCIONATTENTIONWARNUNGATENÇÃOSpanishFrenchGermanPortugueseJapaneseChineseKoreanArabicLEIA E COMPREENDA AS INSTRUÇÕES DO FABRICANTE

• Sales and Service through Subsidiaries and Distributors Worldwide •Cleveland, Ohio 44117-1199 U.S.A. TEL: 216.481.8100 FAX: 216.486.1751 WEB 

iiSAFETYiiARC RAYS can burn.4.a. Use a shield with the proper filter and coverplates to protect your eyes from sparks andthe rays of the arc when weld

iiiSAFETYiiiFOR ELECTRICALLYpowered equipment.8.a. Turn off input power using the disconnectswitch at the fuse box before working onthe equipment.8.b.

ivSAFETYivPRÉCAUTIONS DE SÛRETÉPour votre propre protection lire et observer toutes les instructionset les précautions de sûreté specifiques qui parra

vvThank Youfor selecting a QUALITY product by Lincoln Electric. We want youto take pride in operating this Lincoln Electric Company product••• as much

viviPageInstallation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Section ASpec

A-1INSTALLATIONK126-[ ] INNERSHIELD® PROA-1Duty Cycle40% 60%80%100% ProcessFCAW-SSModelK126-10K126-11K126-12K126-13Operating TemperatureStorage Temper

A-2INSTALLATION K126-[ ] INNERSHIELD® PROA-2ProductNumberK466-1K466-2K466-3K466-4K466-5K466-6K466-7K466-8K466-9K466-10Feeder TypeLincolnExceptLN-8 o