Lincoln-electric VANTAGE IM10044 User Manual Page 23

  • Download
  • Add to my manuals
  • Print
  • Page
    / 53
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 22
B-5
OPERATION
B-5
23. 415 VAC RECEPTACLE
This is a 415VAC receptacle that provides auxil-
iary power. This receptacle has 32 amp rating
and IP66 rated. Refer to the AUXILIARY
POWER RECEPTACLES section in the installa-
tion chapter for further information about these
receptacles. Also refer to the AUXILIARY
POWER OPERATION section later in this chap-
ter.
24. GROUND STUD:
Provides a connection point for connecting the
machine case to earth ground. Refer to
“MACHINE GROUNDING” in the Installation
chapter for proper machine grounding informa-
tion.
25. RCD:
Residual Current Device” provides protection
from active to ground contact.
RCD will not protect against electrical shock
resulting from contact with active and neutral
wires.
26. VRD INDICATOR LIGHTS:
Indicates OCV voltage across the output termi-
nals. Also indicates operation of VRD in CC
mode. A Green light indicates OCV below 30V
and a red light indicates OCV above 30V.
During welding both lights will flash, depending on
the type of Consumable being used.
BATTERY JUMP START TERMINAL
(27-28)
27. POSITIVE BATTERY JUMP START
TERMINAL.
28. NEGATIVE BATTERY JUMP START
TERMINAL.
12V battery jump start feature is standard.
Covered output studs for convenient access, and
protection against accidental impact. can be used
to jump-start a utility truck with up to 800 cold
cranking amps. Can also be used to jump-start the
VANTAGE® 575 CUMMINS.
29. BATTERY DISCONNECT SWITCH
Battery disconnect switch provides lockout/tagout
capability. Switch is conveniently located on the
front bottom of the machine.
30. AIR CLEANER SERVICE INDICATOR
Air cleaner service indicator provides a Go/No-Go
visual indication of useful filter service life. Also
located inside the engine compartment. (SEE FIG-
URE B.2)
FIGURE B.2
VANTAGE® 575 CUMMINS
30
Page view 22
1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 52 53

Comments to this Manuals

No comments