Lincoln Electric IM886 User Manual Page 1

LINCOLN WELDING ARMSOPERATOR’S MANUALIM886April, 2006Safety Depends on YouLincoln arc welding and cuttingequipment is designed and builtwith safety in

3SPECIFICATIONS WELDING ARMS3DESIGN FEATURES• 360° rotation with the 6000 series stanchionsecured directly to the floor.• 180° rotation with the 600

• Moving welding arm parts can cause serious per-sonal injury. Keep hands away from pinch pointsand from the spring rod clevis and swivel plates.• Fa

7. Lift the stanchion assembly off the ground andmove to desired location.8. Secure the stanchion to the floor per qualified engi-neer specifications

A-3INSTALLATIONA-310. Install with arm section with the six 1/2" x 1-1/4bolts and washers.11. Raise the front of the arm with a forklift or hoist

A-4INSTALLATION WELDING ARMSA-421. Adjust the length of the cables and hoses comingout of the front of the arm to permit connections tothe feeder.22

A-5INSTALLATION WELDING ARMSA-5ADJUSTING FOR WIRE FEEDER WEIGHTThe holes in the arm triangle compensate for differentwire feeder weights. The top p

B-1OPERATIONWELDING ARMSB-1SAFETY PRECAUTIONSSHIELDING GAS CONNECTIONCYLINDER may explode ifdamaged.• Keep cylinder upright andchained to support.• K

C-1ACCESSORIESC-1OPTIONS AND ACCESSORIESK1779-11 Mini Console(See Firgure C.1)The mini console adds more useful functions to thewelding arms. Includ

C-2ACCESSORIESC-28. Extend the hose and cable(s) out through the rightfront 2" tube about 32" and then feed them throughone of the 15"

C-3ACCESSORIESC-3K1779-1 4' x 4' x 1" Lift Truck Platform.(See Figure C.3)Platform for use with the 6000 series stanchion arm.Install a

FOR ENGINEpowered equipment.1.a. Turn the engine off before troubleshooting and maintenancework unless the maintenance work requires it to be running.

C-4ACCESSORIESC-4K1779-7 Dual Gas Cylinder Holder Kit(See Figure C.6)Mounts directly to the stanchion. Includes bracket,chains and hardware. • If th

D-1MAINTENANCED-1WELDING ARMSROUTINE MAINTENANCE• Every 6 months, grease the pivot arm pivot point.The grease fitting is located at the top of thestan

F-1DIMENSION PRINTF-1WELDING ARMS103”94”24”137”161”15”9”

NOTES WELDING ARMS

NOTES WELDING ARMS

NOTES WELDING ARMS

WARNINGAVISO DEPRECAUCIONATTENTIONWARNUNGATENÇÃOSpanishFrenchGermanPortugueseJapaneseChineseKoreanArabicREAD AND UNDERSTAND THE MANUFACTURER’S INSTRUC

WARNINGAVISO DEPRECAUCIONATTENTIONWARNUNGATENÇÃOSpanishFrenchGermanPortugueseJapaneseChineseKoreanArabicLEIA E COMPREENDA AS INSTRUÇÕES DO FABRICANTE

• Sales and Service through Subsidiaries and Distributors Worldwide •Cleveland, Ohio 44117-1199 U.S.A. TEL: 216.481.8100 FAX: 216.486.1751 WEB

iiSAFETYiiARC RAYS can burn.4.a. Use a shield with the proper filter and coverplates to protect your eyes from sparks andthe rays of the arc when weld

FOR ELECTRICALLYpowered equipment.8.a. Turn off input power using the disconnectswitch at the fuse box before working onthe equipment.8.b. Install equ

ivSAFETYivMar. ‘93PRÉCAUTIONS DE SÛRETÉPour votre propre protection lire et observer toutes les instructionset les précautions de sûreté specifiques q

vvThank Youfor selecting a QUALITY product by Lincoln Electric. We want youto take pride in operating this Lincoln Electric Company product••• as much

vi vi TABLE OF CONTENTSPageProduct Description ...1Com

1PRODUCT DESCRIPTION WELDING ARMS1PRODUCT SUMMARYGeneral Physical DescriptionThe Lincoln Welding Arms create an organized workenvironment. The mode

2COMMON EQUIPMENT PACKAGES WELDING ARMS2ITEMK1778-1K1779-1K1779-13K1779-7K1779-8K162-1K1779-11K1779-9DESCRIPTION6000 series arm with stanchion.Lift